Best Hybrid Table Saw – Review and Buyers Guide

As a professional or DIY woodworker, the use of a table saw such as a Hybrid table saw cannot be overemphasized. This typical piece of machinery is available to make most of the best available cuts ranging from ripping to crosscuts on woods.

The hybrid table saw can sometimes be stationary or difficult to move, probably due to its massive construction and heavyweight. It comes with combined features of a cabinet table saw, and a traditional Jobsite saw. In this post, we will review some of the best hybrid tables saw you can get today.

Check them out;



Product Name



#1. Dewalt dwe7491RS - Best Hybrid Table Saw For Beginners



#2. Bosch 4100-09 Table Saw – Alternative Hybrid Table Saw for Beginners



#3. Sawstop CNS175-TGP36 Saw – Best Safety Hybrid Table Saw



#4. Shop Fox W1819 – Best Hybrid Table Saw For Professionals



#5. Grizzly GO690 – Best Quality Hybrid Table Saw


#1. Dewalt dwe7491RS - Best Hybrid Table Saw For Beginners


The Dwe7491RS is yet another Dewalt series classic, and it comes with such an impressive feature found suited by any DIYer woodworker. It is a heavy piece of machinery has it comes out of the box with size dimensions around 31 x 24.5 x 31-inches and weighs 90 pounds. It stands well on four adjustable legs even on uneven surfaces. The table saw has a table with a diameter of 21-7/8 x 26-3/8-inches that provides superior wood material support.

The Dewalt Dwe7491 RS features a 15-AMPS power motor that can run at a no-load speed of 4,800 rpm. The power of the motor allows for accurate and precise ripping cuts on both hard and softwoods. It features a 24-tooth carbide blade with a diameter of 10-inches. The blade system allows for bevel cuts at angles of 45 and 90 degrees respectively. The blade can make a depth cut of 3 1/8-inches at 900 and 2 ¼ inches at 450. The hybrid saw table has a rip capacity of around 32 1/2-inches.

Also, the Dewalt dwe7491RS features a rack and pinion fence system which makes fence adjustments fast, easy, accurate, and smooth. Its ability to make narrow rip cuts stems from the presence of a telescoping fence rail. This retracts easily to create a small portable package. Also, the flip-over ripping fence can provide you with narrow rip cuts. A rolling stand is included, and it is designed to set up the table saw easily and also ensure excellent stability.

Furthermore, the Dewalt dwe7491RS features an onboard storage system that houses all the internal components. This same onboard storage system offers easy access to safety components such as the riving knife, Blade Guard Assembly, milter gauge, fence, wrenches, and push stick when you are not using them. The presence of a transparent blade guard protects you from the spinning blade. Another safety precaution imbibed in the hybrid table saw is the presence of a power switch right in front for easy access even during cases of emergencies. The best thing about the table saw it is upgradable. It can be upgraded to have a dado throat plate for more versatility. One last feature is that the hybrid table saw features a 2 ½ inches dust collection port that allows for efficient dust extraction and prevent dust accumulation.


  • The dwe7491RS can easy be moved around thanks to the presence of a heavy-duty rolling stand.
  • The large rip capacity of around 32 ½ -inches allows you to work on more significant projects
  • It is small and compact.
  • The dwe 7491RS cut wood accurately due to the presence of a rack and pinion fence system.


  • A bit expensive

#2. Bosch 4100-09 Table Saw – Alternative Hybrid Table Saw for Beginners


The Bosch model is an exceptional name in many American homes, and they offer no exception when it comes to the manufacture of table saws. One of such hybrid table saw is the Bosch 4100-09 table saw which comes at size dimensions of 29.4 x 21.5 x 29-inches and weighs 92 pounds. One notable feature about the hybrid table saw is that it comes with an easy to set-up gravity-rise wheel stand with a release lever to raise or lower the saw for easy transport.

When it comes to the saw blade, this product has a carbide tape blade measuring 10-inches with forty tooth design. The blade system allows it to cut into any material in time and reduce splinters. It performs a versatile bevel angle cuts between 2 to 47 degrees. When it comes to its cut depths, the table saw can perform a 2 ½- inch cut depth at 45 degrees and 3 1/8- inch cut depth at 90 degrees. In general, this unit has a rip cutting capacity of 25-inches to the blade’s right.

When it comes to power, the Bosch 4100-09 table saw has a 15 AMPs inductive motor that delivers a max speed of 3,650 rpm at 4 horsepower. It also features a square Lock Rip fence that allows for superior clamping and precise accuracy. The table saw unit is top-notch when it comes to safety; it has a smart guard system which includes a blade guard, riving knife, and anti-kickback pawls. For dust collection, the table saw unit has a dust collection port around 2 ½ -inches in diameter.


  • It is easy to use and quite portable
  • It comes with a superior and accurate cutting capacity
  • The presence of a smart guard system renders the table saw safe for use.
  • The rip fence is durable and accurate.
  • It comes with a collapsible gravity stand design which makes it great for movement and storage.


  • Some customers complained about the unit giving out vibrations while in use.
  • It has awkward blade tilt adjustments once outside the 45 to 90-degree range.

#3. Sawstop CNS175-TGP36 Saw – Best Safety Hybrid Table Saw


The sawstop CNS175-TGP36 is quite an effective hybrid table saw that serve a major professional use. It comes with exclusive designs, features, and advanced technology. It has an overall size dimension of 72 x 19.5 x 47 inches and weighs no less than 338 pounds.  It is made of a Rigid steel material that contributes adversely to its durability. This is a typical unit that offers a good combination of safety and versatility.

The hybrid table saw features a well shrouded 40-tooth blade to help improve the dust collection system. The saw blade comes with a diameter around 10-inches, and it offers a cut depth of 3 1/8 inches on left tilt. On the overall, the sawstop CNS 175-TGP36 has a rip capacity of 30-inches. When it comes to power, the Saw stop CNS 175-TGP36 delivers a power of 1.75 horsepower for a versatile performance.

This features a 36-inch T-Glide fence system which offers more precision. The T-glide fence locks down to ensure the best possible cuts no matter the material that is used. This lockdown system is effective, and it does not experience deflection. It features a heavy-duty trunnion and cast iron table which is coated to ensure a steady and true cut. It also comes with a zero clearance insert for wood support throughout the cut and reduces wear out.

This hybrid table saw puts safety into the highest consideration as it comes with a saw stop feature. This saw-stop feature is a detection technology that stops a saw blade once a body or hand is detected by the blade. It also comes with a full dust collection port of size around 4.0-inch diameter.


  • High rip accuracy.
  • Complete dust collection system.
  • It comes with a powerful motor engine.
  • It is spacious.
  • Good Sawstop safety mechanism.


  • The work surface isn’t flat on all sides.
  • It is quite hefty and can’t be moved around all the time

#4. Shop Fox W1819 – Best Hybrid Table Saw For Professionals


The Shop Fox W1819 is indeed a hybrid table saw that comes with top-quality parts and has a flawless design. It is a heavy-duty machinery best use in the workshop by professionals. This hybrid table saw emphasizes safety has it comes with high-grade safety features. Right from unboxing this product you will observe a heavyweight hybrid table saw with size dimensions 62 x 40 x 15.5- inches and weight around 450 pounds.

All the parts of this machinery are made out of cast iron which contributes to its lasting durability. It features a 10-inch diameter blade with a rip capacity of 29.5-inches. Included with the blade is a blade tilt that allows angle adjustment from 0 – 45 degrees. At 90-degrees the blade makes a max depth cut of 3 1/8- inches and max depth cut of 2 3/6-inches at 45-degrees. Also, this table saw comes with a massive motor engine with 12.8 AMPs and provides 3 Horse Power, which is far greater than any other table saw reviewed so far. The saw runs at an arbor speed of 4,300 rpm.  It features a sharp riving knife that prevents kick-back from a newly cut piece of lumber.

Cast-iron trunnions and a T-slot milter gauge are included to provide support when working with longer pieces of wood. It also features a milter fence with a flip stop to provide additional support. The flip stop is necessary for making multiple cuts of wood. Now, there is a magnetic switch which allows you to control the usage of the table saw, and it is easily assessable. The presence of an overheat protection mechanism keeps the machine from high thermal overload.

As a safety precaution, the Shop Fox W1819 comes with a blade guard assembly. The blade guard includes parts such as clear polycarbonate shield, spreader and anti-kickback pawls. The polycarbonate blade guard allows you to view the part being cut clearly during work. The table saw comes with a dust collection port with a diameter around 4.0-inches allowing the collection of dust or debris from wood parts.


  • The Shop fox model comes with excellent safety features.
  • It has a quick-release blade mechanism.
  • It is easy to assemble
  • Comes with an easily assessable magnetic switch.
  • It is safe to use.


  • Set screws have poor quality.
  • The price is too high.

#5. Grizzly GO690 – Best Quality Hybrid Table Saw


The Grizzly GO690 has a heavy build yet quite simple designs. It stands out as one of the best has it comes with impeccable performance and smooth operation. It comes with a lot of features effective to tackle a lot of wood word tasks. Talking about the size the table saw comes with size dimensions 24 x 30 x 43 –inches and weighs no less than 530 pounds. It is a rock-solid heavy machine with amazing stability made up of cast iron (also contributing to its stability).

It features a 10-inch sized blade which is powered up by a 12.8 AMPS that comes with a maximum speed around 4300 rpm providing 3 Horsepower. The motor runs on an AC power supply of 220 volts because it is corded electric. The presence of a triple belt drive system on the motor keeps the torque maintained and decreases the loss of power. It comes at a rip capacity around 29 1/2- inches. It features a coated table with size around 27 x 40 inches (when fully extended). It can perform dual-angle cuts around 45 and 90-degrees. At 90 degrees it can cut 3 1/8 inch depth and 2 3/16 inches at 45-degrees.

The Grizzly GO690 has a Camlock T-fence, which is well-made and allows for accurate and precise cut measurement. Armed within the table saw is a quick-release riving knife which works in the direction of the blade. When it comes to cleaning and dirt maintenance, the Grizzly GO690 has a 4-inch dust collection port that takes away debris effectively. Now it comes with a limited warranty up to 3-years.


  • It is a high-quality and very sturdy product with a long shelf-life.
  • It has excellent stability.
  • High quality.
  • It has an inboard storage system.
  • It is ergonomically designed contributing to its easy set-up.


  • It comes with a 6 feet power cord, which is quite short.

Factors to Consider When Buying a Table Saw


Blade size

Motor power

Size dimensions and weight

Rip Capacity


Dewalt dwe 7491RS



Max speed of 4,800 rpm

31 x 24.5 x 31-inches

90 pounds

32.5- inches


Bosch 4100-09 Table saw



4 HP

Max speed of 3,650

29.4 x 21.5 x 29-inches

92 pounds

25- inches


Sawstop CNS175-TGP36 saw


1.75 HP

72 x 19.5 x 47-inches

30- inches

Partly Immobile

Shop Fox W1819


12.8 AMPs


Max speed of 4,300

62 x 40 x 15.5- inches

450 pounds

29.5- inches


Grizzly GO690


12.8 AMPS

3 HP

Max speed of 4,300

24 x 30 x 43- inches

530 pounds

29.5- inches


1. Rip capacity

This is yet one of the significant factors to consider as it determines the wood size your table saw can cut. Do you want a table saw to cut wide boards or plywood? Then your best option is to get a hybrid table saw with rip capacity of 24-inches or more.

2. Saw Blade Types

The blade type on your hybrid table saw goes a long way to determine the cut depth of the table saw. For the most common table saw, you will find saw types comprising of 10-inch blade. However, there are other blade types around 8-inches and 12-inches depending on the extent of cut you want to make. The general rule states that a 10-inch blade can cut through 3-inches of thick wood and a 12-inch blade can cut through 4-inches of thick wood. Therefore, for whatever table saw you are getting, buy with the knowledge of what you want to work on.

3. Dust Collection

Most new models of table saw come with a dust collection port. This feature is available to get rid of dust, dirt around the working area. The accumulation of dirt in the machine could also cause clogging in the long run. The dust collection port all comes in varying sizes, which goes a long way in determining the amount of dirt or dust that can be collected now if you are concerned about your nasal health or overly concerned about keeping a clean environment during woodwork. Then your best option is to get a dust collection port with a larger diameter.

4. The Fence system

The fence is quite an incredible feature when it comes to making the best purchasing option of a hybrid table saw.  There are types such as the rack and pinion fence and the T-slot fences. The proper alignment of your fence system will determine how precise, accurate, and smooth your cuts will be. A fence should align with the blade of your saw properly. If not, it will be is quite worthless. Therefore, your best option is purchasing a table saw with a properly aligned fence system and steers clear of ones who don’t have.

5. Blade Guard

The use of a hybrid table saw on its own is quite unsafe. However, the presence of safety component such as a blade guard helps keep safety in check. It appears as an enclosure placed over the blade to prevent direct contact with fingers when in use. However, it is sometimes removed when making larger cuts. One thing about some table saw models is that the removal and reattachment of their blade can be easy or quite complicated. Therefore, do be sure to look into this feature when making a good buying decision.

6. Bevel Capability

There is often the need to make angled cuts. For most table saws, angle cuts of 0, 45, and 90 degrees are possible. However bevel cuts are available between 0 to 45 degrees and many saws tilt to make angled cuts. Most of the saws tilt to the left, and sometimes right others tilt both ways for personal preference. Therefore, there is a need to look for angles that match popular bevel sizes.

7. Motor Power

The more power the motor of the hybrid table saw has the faster and more powerful the saw is. The higher power allows the cutting of denser woods. Most table saws come at 15AMPS and deliver high horsepower. Therefore, it is advisable to go with a table saw of higher power rating as it will save you the trouble with cutting woods.

How to Use a Hybrid Table Saw

When it comes to using a type of saw, such as a hybrid table saw for woodwork, there are two ways to go about it.

  1. 1
    The use of the table saw to make rip cuts.
  2. 2
    Use of the table saw to make cross cuts.

To make ripping cuts;

  1. 1
    Use the blade adjusting handle to raise the blade height a little above the wood’s thickness. The blade should be approximately 0.25 inches higher than the thickness of the wood.
  2. 2
    Adjust the fence width to the intended amount to cut using a measuring tape or ruler. This adjustment is made possible with the aid of a handle. With the handle, the side rail will be loosened or hardened so it can move the fence right or left.
  3. 3
    Now, you need to prevent kickback, and this can be achieved by setting the wood against the side fence, and table saw firmly.
  4. 4
    Lower the blade guard (if installed) and turn on the blade for a cut.
  5. 5
    With the aid of a push stick, push your wood board through the blade.
  6. 6
    Switch off the saw, once done with cutting.

To create a crosscut;

  1. 1
    Adjust the blade a little bit higher than the thickness of wood you are cutting.
  2. 2
    Set the milter gauge into the slot if it was not pre-installed in the table saw.
  3. 3
    For perfect crosscuts, square the milter gauge with the saw blade. This is done by placing a 45-degree triangle along the blade length and then adjusted to 90-degrees.
  4. 4
    Now that you have squared the milter gauge, hold the wood against its edge.
  5. 5
    Turn on the saw and gently but deliberately push wood with your right hand onto the milter gauge handle to cut the wood board.
  6. 6
    Once you are done with cutting, pull back the board back to where you started, and switch the saw off.

Safety Guide on the Use of Hybrid Table Saw

The use of technical tools and machinery comes with an enormous amount of safety risks. Therefore, this has led to the attachment of safety components to the machinery such as the presence of blade guarding system in a hybrid table saw. However, just like every other type of saws, there is still an urgent need to take note of some safety guidelines in the use of the hybrid table saw to steer clear of danger. They are;

  • Wear body protectors: the use of safety goggles for the eye and sturdy earmuffs for the ear are indispensable when using a hybrid table saw. The safety goggles will prevent dust or debris from entering your eye. Likewise, the earmuffs help protect against noise pollution as the saw blades make incredible loud noises while in use.
  • Ensure blade guard is properly installed: Even though the blade guard appears as an irrelevant component and is sometimes removed. Do note that these blade guards save your fingers from getting in contact with the blade directly. Also, they prevent debris from kicking back.
  • Avoid cutting warped boards: Cutting warped or bent boards will result in rough cuts and could be dangerous in that it will cause wood to kickback. Therefore avoid cutting boards that have been bent or warped.
  • Note the position of the on/off switch: This is important just in cases of emergencies when there is a need to turn off the table saw. Now, most table saws have a large switch which could be accessed easily with the knees when hands are occupied.
  • Adequately make use of push stick: The use of push stick help guide the wood when cutting through. This is important because the clearance for your hands between the side fence and blade may be little.

Frequently Asked Questions

What is the relevance of AMP of a saw?

AMP is the shortened form of an amplifier, and it qualifies the overall power of a table saw. The higher the AMP, the more power the saw can deliver when it comes to ripping capacity.

What is the function of a riving knife?

A riving knife is a splitter that helps prevent kickbacks from materials. It appears like a metal plate which lies behind the table saw.

What should I consider in saw blade selection?

To make a blade saw selection for your table saw. Firstly check the compatibility (such as if it’s the right size) of the saw blade to the table saw. Then check for the teeth configuration. For instance, a blade with larger teeth can help eliminate a considerable amount of chips over time.


With the simplified list of the best table saws, review of their special features, and frequently asked questions I do hope this post has covered enough ground to help make the best selection of table saw suited for your need. Good luck in all your endeavors and remember to work smart and be safe.

Leave a Comment: