If you've made it here, that means you own a table saw, or you intend to buy one.
This is the perfect time where you put aside the manufacturers, the models, the power, and focus solely on the quality of the blades.
Unfortunately, even the best table saws can come with a low-quality blade since manufacturers mostly focus on designing the units.
Therefore, you'll usually end up in a situation where you'll need a new set of blades, and that's where we come in.
We've done the job, thoroughly researched it, and found the best table saw blades.
Stick here with us, and we'll share our findings, along with a buyer's guide to help you learn more about them.
Table of Contents
- Top 8 Table Saw Blade Reviews You Can See
- #1. DEWALT 10-Inch Miter / Table Saw Blades - The Best Table Saw Set Of Blades
- #2. Diablo by Freud D1060X - The Best 10-Inch Table Saw Blade
- #3. Overpeak 10-Inch Table Saw Blade - The Best Budget Blade
- #4. Forrest WW10307100 Table Saw Blade - The Best Ripping Blade
- #5. WEN BL1060 Professional Woodworking Saw Blade - The Best Ultra-Thin Kerf Blade
- #6. Makita Carbide-Tipped Saw Blade - The Best Heavy-Duty Blade
- #7. Freud's 10X60X5/8 Table Saw Blade - The Best High-Density Blade
- #8. CMT 256.050.10 ITK Industrial Combination Saw Blade - The Best Combination Blade Set
- Things to keep in mind about table saw blades: A buyer's guide
- What is the best table saw blade?
- Final thoughts
Top 8 Table Saw Blade Reviews You Can See
$ — DEWALT 10-Inch Miter / Table Saw Blades ~ 60T - A durable pack with two styles of table saw blades - general purpose blade set and crosscutting blades. DeWalt's finesse is evident in each blade, especially in the smoothness of the cut. Suitable for: miter and table saws.
$$ — Diablo by Freud D1060X ~ 60T. Wood or metal? It doesn't matter with this 60-teeth set of blades that can rip through anything. Clean and precise cuts are what you're getting if you purchase this set. Suitable for: jobsite table saws, miter, and classic saws.
$ — Overpeak 10-Inch Table Saw Blade ~ 90T. If you mind the noise or suffer from conditions such as tinnitus, this set of table saw blades would amaze you with its noise suppression. Also, the blade has 90 teeth; what's not to like?. Suitable for: table and circular saws.
$$$ — Forrest WW10307100 Table Saw Blade ~ 30T. If you're ready to move on to thicker materials that require strong blades, this is the set you need. There are various crosscut blades to choose from, but this one rips through metal with ease. Suitable for: table and circular saws.
$ — WEN BL1060 Professional Woodworking Saw Blade ~ 60T. Why go for something exotic when you can settle for the reliable pick of the litter? WEN has the classic 60T blade for woodworking!. Suitable for: table and miter saw.
$$ — Makita Carbide-Tipped Saw Blade ~ 24T. You won't see any debris or material loss if you use this Makita blade. Also, it's efficient in dissipating heat, which is great for high-demanding projects. Suitable for: table and circular saws.
$$ — Freud's 10X60X5/8 Table Saw Blade ~ 60T. Ripping and crosscutting has never been easier than with a high-density blade such as this one. It is the epitome of durability and standard in the industry. Suitable for: table and circular saws.
$$ — CMT 256.050.10 ITK Industrial Combination Saw Blade ~ 50T. An industrial combination blade with much to offer. You can alternate between deep and shallow cuts and still have smooth finishes. Suitable for: table and circular saws.
You'll find various blades for different types of saws on Amazon, ranging from combination table saw blades to hybrid blades. However, the most common is the classic 60T blade for straight and curved cuts, such as the DEWALT 10-Inch Miter / Table Saw Blade.
DeWalt's motto is "Guaranteed Tough." and there's a reason for it. Aside from their quality power tools, a lot of woodworkers choose their blades since they've shown the best durability over a certain period of time.
A common issue with the table saw blades is that they wear off relatively quickly, especially if you're cutting metal. However, DeWalt's blade teeth configuration and tough tungsten carbide build provide a solid exemption to the rule.
This pack contains two blades - a standard 60T 10-inch blade with a fine finish and a general-purpose blade with 32 teeth. These thin-kerf blades are perfect for all table and miter saws, and they work with various wooden stock - plywood, hardwood, and softwood.
We tested both of these blades with DeWalt's saws and were pleasantly surprised to see that there were practically no vibrations when using them. The computer-balanced plate did its job and made these blades extra stable and accurate.
We don't really have more info, and we think that the previous lines are enough to see that this is probably one of the best packs of table saw blades, if not the best, on the market right now.
Experienced users know what Freud offers, and they've probably used a product or two from their collection of power tools. But, have you heard about Diablo by Freud D1060X fine-finish saw blades?
This is a 10-inch table saw blade with a high tooth count of 60 teeth. It has multiple uses, ranging from cross cuts, rip cuts, and bevel cuts. It is a carpenter's favorite companion due to its laser-thin kerf that leaves no room for sanding.
Freud managed to put a lot of things into a simple product, such as a table saw blade. It has a carbide build with carbide-tipped teeth; the coating is anti-corrosive and protects the blade from heat. Also, this type of blade coating prevents sticking of any kind.
Another thing we learned from various customer reviews and previous experiences is that this Diablo blade, aside from probably being the best table saw blade for ripping, also works with a variety of models.
It has the standard dimensions that fit most table saws that are popular right now, and it can push the speed of 5000 RPMs.
We can't really call this a flaw, but we didn't like that the blade body flexes a bit more than usual. It could be problematic when working with metal, but it shouldn't pose that big of a problem. Aside from this slight inconvenience, it's amazing and should work well.
Most combination blades and ripping blades aren't that expensive, but they break quite often, and you'll usually have to replace them in a couple of months. It builds up in a year's time, and so does the money spent on blades. Therefore, try our budget pick of the day, the Overpeak 10-Inch Table Saw Blade.
The first thing you'll notice regarding the design of this alternate top bevel (ATB) blade is the number of teeth. It has 90 carbide teeth that are perfect for cross-cutting wooden materials since they're easy to resharpen.
Furthermore, the ATB blade design has alternating teeth that are beveled in opposite directions, which helps with debris and getting those perfectly shaped cross-cuts. Due to the number of teeth and the tungsten build, this blade can be used with different tools - miter, table, and circular saws.
It can give you speeds up to 6000 RPMs, which is ideal for industrial work, and it holds up really well with metal, even steel.
Overpeak manufactures and distributes various types of table saw blades which differ in design and application. You can find similar, thinner blades with fewer teeth if you work only with wood, but this is the product you want if you need variety in your projects.
The blade also has stabilizer vents that keep noise and vibrations in check, therefore improving your stability over the workpiece and the saw itself.
After we inspected it, we had a couple of things to notice. This isn't a thin kerf blade, but a crosscut blade that does a decent job cutting through most materials. The accuracy isn't that impressive as it was with the DeWalt blade, but it does the job better than most thicker blades.
All in all, we were overall satisfied with the result and would recommend this to pros and beginners.
Up next is a series of rip and crosscut table saw blades that you've got to check out. They're the most expensive items on this list for a reason. It's the Forrest WW10307100 Table Saw Blade review.
This 10-inch table saw blade doesn't have a high tooth count since this is an all-purpose table saw blade that can rip, make cross-cuts, straight and curved cuts. Full kerf blades remove more material since the width of their cut is above 0.126 inches, but this is surprisingly a 3/32-inch blade, even though it has only 30 teeth.
It's an ATB-style blade that makes smooth finishes thanks to the special design, while the teeth themselves are made from C4 carbide known for added durability and longevity.
We tried it out with a Makita saw, and we were quite surprised with how quiet it was and the low backside tear-out. Most thin-kerf blades will usually have more debris, but not this one.
On the other hand, working with plywood wasn't the greatest. Cutting through hardwood was a smooth process, but ply cuts weren't as good as you'd expect.
Also, the price is quite astronomical, even for specialty blades. Yes, it will last much longer than most combination blades, but it's a price you have to be willing to pay. Other than the price tag and a slightly bad experience with plywood, we have nothing more to report.
No matter the blade you currently use, you won't make a smoother cut than with the ultra-thin kerf blade WEN BL1060.
You probably know that WEN makes it all - saws, industrial machines, manual tools, and blades. Whatever your current project is, you won't find the wrong blade for it in WEN's collection. Take this one, for example.
It's a standard 10-inch table saw blade with 60 teeth that makes smooth finishes. But, how smooth? Well, the kerf is 1/10-inch, which is way less than what full-kerf blades have. Aside from having clean cuts, your efficiency levels will skyrocket since it's much easier to cut with it than with most blades with more teeth.
Moreover, WEN is a well-known company that works with others, thus making these blades compatible with a variety of jobsite saws on the market.
Another crucial thing that we need to mention is the heat expansion slot that regulates the blade's flexibility at different speeds. If it runs at a speed higher than 3500 RPMs, it gets hotter and expands, which is a good thing when working with different wooden materials.
Still, customers have noted that it dulls out relatively fast, which is to be expected from a blade that runs at higher rates than normal. It's a good backup to have when your current table saw blade gives out.
Why should we tell you about Makita and what their legacy is when we can just let the Makita Carbide-Tipped Saw Blade speak for them?
Woodworkers that work on the field will certainly appreciate what this crosscut blade can bring to the table. It is our best heavy-duty blade for a reason - this thing can cut!
It has 24 teeth, weighs 5 lbs, and has an alternate top and alternate face design that proved to be quite efficient in terms of accuracy and overall longevity. Aside from triple chip grind, this is one of the best designs you can find for metals and harder wood.
There's practically no blade drag on the motor, and the tear-out is minimal with this saw blade. The blade size is not the standard one, which might be problematic for some of you, but the people that have the type of saw that supports this blade know what we're talking about.
Noise and vibrations are not an issue when making cross-cuts, as well as heat distribution, thanks to the expansion slots. We've talked to several jobsite users, and they've all had good things to say about this Makita blade - it's hard, precise (especially for framing types of construction), and lasts for a long time.
This one blade might seem all you need, but the truth is that this is a specialty blade that not all saws can benefit from. If you have a saw that can use it, you'll be more than glad that you've ordered it.
The next item also comes from Freud, but this one is quite different since it's the first Triple Chip Grind (TCG) blade that we have on this list. Let's see what it's all about with Freud's 10X60X5/8 Table Saw Blade.
This table saw blade has trapezoidal teeth that alternate with flat-top teeth for a perfect cut against the grain with tough wood and metals. It's one of the first blades you'll think of when you decide to work on tougher projects.
Freud is also known for its TiCo carbide blend. The density of their products is through the roof, which makes them able to withstand a lot of pressure, especially at higher RPMs. Of course, if you're cutting through metal, you'll benefit more from slower speeds, but it's good to know that Freud's crosscut blades will hold up to the test.
Also, Freud's blade coatings often contain silver which is a good supplement that prevents corrosion and keeps the blade safe from sticky particles.
The final good thing we have to say is that this blade, as well as many others from Freud, comes with a lifetime warranty - a very special thing from such a strong manufacturer.
We did see some instances of it burning wood more than you'd expect from a heavy-duty blade, but a little moderation with speed should help maintain stability.
Finally, we've made the trip around some of the greatest table saw blades that the market has to offer, and we have one more to wrap up the reviews. It's the CMT 256.050.10 ITK Industrial Combination Saw Blade.
The beauty of this blade lies in the fact that it can cut almost anything since it's a combination blade - metal, wood, plywood, softwood - you name it! Also, this is a good melamine blade and works well against many types of plastic, including OSB sheets.
You'll get four alternate top bevel blades, but that's not what interests us right now. It's the FTG blade with deep gullets that create efficient chip clearance.
It also has tri-metal brazing made from alternating silver, copper, and silver. This type of build allows the blade to handle much more stress than most combination blades you're used to seeing.
One of the many benefits of getting an industrial-grade combination blade is the CNC-machined precision, especially in the edge angles, which improves your cutting performance.
As for the flaws - it's not like most dado blades, it will cut bigger dados, more than 1/8-inch wide, but the width is not adjustable, which is the main difference between this one and regular dado blades.
Also, this combination blade is a bit expensive in comparison with its quality, but it's still worth it.
Things to keep in mind about table saw blades: A buyer's guide
Finding a blade for your table saw is not as easy as you might think. There are various types of saws for table use and even more blades for each of the criteria.
Therefore, getting every point correct is hard, but there are some universal things you can keep in the back of your head to help you make the decision. Stay with us and find out what they are.
1. Blade type
Okay, so there are multiple blades that are generally conceived as the most common ones for classic saws, so we'll go over some of the main designs.
Combination blades are often referred to as general-purpose blades or all-purpose blades due to their innate ability to cut through most stock. Thanks to the arrangement of their teeth, four ATB teeth, and a raker tooth, you can easily make an ambitious cut with an aggressive hook angle.
Cross-cut blades have the most common design with more teeth that are distributed in an even way to make smooth cuts. They're used the most since they're perfect for wood and cutting against the grain.
Another type of blade that we mentioned is often used with a circular, or a miter saw, and that is the dado blade. Woodworkers use it to make grooves inside wooden stock, generally for manufacturing furniture or shelves.
2. Blade design
Since now you know more about the types, we'd like to give some info about the design of these blades.
As we mentioned, there are blades with ATB teeth, standing for alternating top bevel. This means that each tooth has a beveled edge on one side for a deeper impact on the wood.
The second design is the Tri chip grind that utilizes different types of teeth in order to get the abundance of material out. They usually have fewer teeth, but the cut is generally wider and used in many industrial zones for more delicate work.
You might've also heard about demolition blades, but they're not used for table saw models. They're crosscut blades for low-quality materials such as chipboard and plastic.
3. Blade kerf
The kerf of a blade is often described as the slit made by a saw, and it's measured in inches. It represents the width of each cut that a saw can make with its blade. Based on the width, you can divide the blades into thin-kerf models and full-blade kerf models.
If the width is the same or above 0.126 inches, that blade is considered a full-kerf blade model. Otherwise, it's a thin-kerf blade that makes delicate cuts, especially in wood. A good example of a full-kerf blade is usually found in metal shops.
4. Tooth count
In general terms, tooth count is not as important as the quality of the blade, but it's a huge factor when you need to decide what blade you're going to use against a specific type of stock. For example, blades with less than 24 TPI are usually used for wood explicitly, while a higher tooth count can be used for metal also.
Most table saws use carbide blades as they seem to be the best option for this line of work. You'll see some variations, such as Freud's TiCo carbide or the occasional tungsten carbide, but that's the main material used for these tools.
You'd think that stainless steel would be a good alternative, but it doesn't hold up in the long run as well as carbide does, so keep that stored in the back of your mind when you're buying the next blade for your table saw.
Are Freud blades worth it?
Absolutely yes. Freud is a long-running company in the world of woodworking, and their tools are one of the best ones on the market. The same goes for their blades.
After all, we have two of their products on this list, so that should be a clear indicator of our opinion. They are tough, durable, and work well with all materials.
What is a 40-tooth saw blade used for?
It depends on the type of blade, but a rip cut and a cross-cut can be made with a blade that has anywhere between 40 and 80 teeth, so that falls in that category.
What is the best blade for ripping?
There are many great ones on Amazon, but our favorite is the Forrest WW10307100 Table Saw Blade. It works wonders thanks to its C4 carbide build that proves to be one of the most durable builds for blades of this sort.
What kind of blade is the best for a table saw?
That's the answer to this article, and our top two picks are the DeWalt model and the Diablo by Freud D1060X.
Are more teeth better on a saw?
As we said, it depends on the project you're working on. Blades with less than 20 teeth are appropriate for wood, while higher-toothed blades can be used for metal and wood, depending on the type.
What is the best table saw blade?
You figured it out by now. The one we favor the most is undoubtedly the DEWALT 10-Inch Miter / Table Saw Blade.
It's perfect for a table, makes smooth cuts, has that certified DeWalt durability, and most importantly, it's cheap. These blades are often changed since they dull fast, and considering a good budget blade is one of the primary things you should do.
- Tougher tungsten carbide stays sharper longer
- Thin kerf for fast and smooth cutting action and The arbor size is 5/8”.
- Computer-balanced plate reduces vibration for improved accuracy and better finish
- Durable tungsten carbide maintains a true edge
- Best used for miter saw and slide miter saw jobs
This was our choice for the best table saw blades, and we hope you enjoyed reading some of these lines. Finding these products was informative for us as well since it allowed us to deepen our research and learn so much more about the world of woodworking.
If you decide to buy one, let us know about your experience and how it worked out for you.