Every woodworker knows the significance of owning a quality miter gauge. It keeps the workpiece steady and fixed at a certain angle, which enables you to make miter cuts and joints.
Furthermore, there are devices with a digital readout that save a lot of time and give you complete precision.
However, there are various miter gauges for different types of saws and units, so it can be very easy to get confused in the sea of so many products.
Well, you can spend countless hours finding the best table saw miter gauge, or you can take a look at this top list and find your fit in a couple of minutes - it's up to you.
Stay with us, and we promise an informative article combined with a detailed buyer's guide.
Let's see what's next!
More...
Top 7 Miter Gauges for Table Saws - General Overviews and Reviews
$$ — INCRA MITERV27 Miter Gauge ~ 2.71 lbs - If you think about it, there are two things you want from the best table saw miter gauges: precision and control. That's the description of this Incra system with 27 angle stops for complete control.
$ — Fulton Precision Miter Gauge ~ 2.55 lbs - Are you looking for a classic miter gauge without the fancy features and gizmos? The Fulton miter gauge has 13 positive stops that are most commonly used by all woodworkers, including you if you choose this one.
$$$ — KREG KMS7102 Table Saw Miter Gauge System ~ 6 lbs - Kreg is well-known for its contributions to the industry, one being this table saw miter gauge. It's factory-calibrated, has a micro adjuster, and the margin for error is practically non-existent.
$$ — POWERTEC 71391 Table Saw Precision Miter Gauge System ~ 5.74 lbs - Even though it might seem unnecessary, a nice design is quite important for table saw miter gauges, especially in dark-lit conditions. This laser-engraved product is sure to change all of that.
$$ — Incra MITER1000/18T Miter 1000 Table Saw Miter-gauge ~ 5.9 lbs - The best miter gauge has many different positive stops that allow for quick adjustments, which is just the case here. With 41 positive stops, this Incra system undoubtedly deserves a place on this list.
$$$ — JessEm 07150 Miter Gauge ~ 8.78 lbs - This one is the ultimate pick of the list for a reason. Not only is it accurate, but it's known for its resilience and long-lasting lifespan. It might cost more than you expect, but it pays off.
$$ — Big Horn 14600 Standard Track Miter Gauge ~ 2.74 lbs - Are you not a fan of newer units? This precision miter gauge has the standard 3/4" x 3/8" slot and works with common angles. It's not that authentic, but it sure does the job perfectly, and it's quite affordable.
If you came for the absolute best miter gauge, there's no need to read on after you hear about this incredible INCRA MITERV27 Miter Gauge.
The Incra miter gauge family has multiple models that are used with different types of table saws, but they are versatile in most cases as you can use them with band saws, router tables, or even belt sanders. This precision miter gauge works with them all due to its compact dimensions and general design.
Incra manufacturers refer to it as a "no-nonsense" design, meaning you get what you paid for - no fancy accessories or unnecessary bulky additions. We like this one the most so we had to try it out and we have to say that we were so pleased with its efficiency.
The workpiece didn't budge, the accuracy was superb, and locks on the angle stops had no interferences. Speaking of it, there are 27 angle stops in the range of 60 degrees, which is more than adequate when it comes to miter cuts.
A cool thing that we were really excited to see was the universal mounting bracket. We used our GTS Bosch table saw with the standard 3/4-inch slot, and the miter gauge fit like a glove. It even has four expansion points and 5-degree increment size.
We have to say that we couldn't find a better one than this. The following items are excellent in their own regard, but this one is truly fantastic!
- Universal mounting bracket
- Precision
- No-nonsense design
- 27 angle stops
- /
Yeah, owning fancy gadgets is always cool, but it can sometimes be just a bit much. So, if you're old-fashioned, here's a simple precision miter gauge to solve your troubles. It's the Fulton Precision Miter Gauge review.
What's there to know about it? First, it's a great economical solution to your troubles if you're not willing to invest in expensive miter gauges. Despite its price, it's still a high-end miter gauge with 13 positive stops in the range of 67.5 degrees. Not too shabby, right?
Using and adjusting it can be done by a kid. You loosen the handle, rotate the gauge head to the desired angle while pulling on the indexing pin, and release it once you find the angle for your cuts. It'll lock in place, and that's it.
Fulton also has an aluminum miter fence to go with this aluminum miter gauge, but you can set it up with most fences and table saws that have the standard miter slot. The miter bar is solid and made of steel that measures 18 inches and provides a stable base for the tool.
We noticed right away, and several customers, that the bottom leaves marks on the table if you don't wax it regularly. If you have a steel or cast-iron table, there shouldn't be any problems.
- Easy to use and adjust
- Steel/aluminum build – durable miter gauge
- Angle range
- Stable
- Leaves marks on low-quality tables
If you know Kreg Tools, you know about the incredible woodworking devices they produce. Naturally, they have some accessories like fences and miter gauges for their saws, and this is one of them. It's the KREG KMS7102 Table Saw Precision Miter Gauge System.
Everyone will tell you the number one reason for getting this miter gauge system is not the features or the design; it's the fact that it comes calibrated out of the box. Of course, we're exaggerating a bit, but it's nice to see that a replacement miter gauge such as this one brings something like that to the table.
It has five positive stops; it's not much, but it covers all the basic miter angles, and the cuts are very accurate and stable. Furthermore, it has a precision lens cursor that gives you a clear red line for improved accuracy.
Since this is a precision miter gauge system, it comes with the Kreg patented fence and Swing Stop, a slide that is securely locked with the help of a knob.
Also, if you're working with tiny stock that requires detailing, there is a micro adjuster on this table saw miter gauge that lets you make increments up to a 100th degree. Moreover, you'll get a Vernier scale for making more complicated adjustments.
It is pricier, and that's what you get with Kreg's tools, but it's understandable given the quality of the miter gauge features.
- Anodized aluminum bar
- Aluminum and steel construction
- Accurate control
- A Vernier scale
- Price
Finding an affordable miter gauge is already good enough, but finding a system that has a lot to offer at a fair price is even better. So, here's the POWERTEC 71391 Table Saw Precision Miter Gauge System.
This set comes with three main items - a good miter gauge, a T-track flip stop, and a miter telescoping fence. Aside from being affordable, the main feature you should be aware of is its cost-effectiveness in terms of the efficiency and accuracy that this set gives you for its price.
Secondly, there are 27 indexing stops and five positive stops to work with, combined with nine others on both sides. It can be adjusted in a 45-degree range, which is problematic for some, but it's more than enough given the woodworking standards for miter cuts.
Thirdly, we have to give some credit to the design of this thing. It has removable plates, a laser-cut aluminum build, it's reinforced with anodized aluminum, and has four expansion disks. Do you even need to hear more?
Now, its overall durability may not be that good compared to Incra miter gauges, but it fits the standard criteria. All in all, it's a four out of five.
- Three-piece set with a miter telescoping fence
- Precise and accurate control
- Great for various woodworking projects
- Excellent design
- Overall durability
#5. Incra MITER1000/18T Miter 1000 Table Saw Miter Gauge - The Best Adjustable Table Saw Miter Gauge
We just had to toss one more Incra unit in here. They are the most demanded miter gauges for the reason that most table saws enjoy being attached to. Without further ado, here's the Incra MITER1000/18T Miter 1000 Table Saw Miter Gauge.
Let's look at the way this high-quality miter gauge was built first. It works with standard miter slots, has a protractor plate and a miter head made of solid steel, and a gold-anodized miter fence.
Now, some might claim that gold is more susceptible than aluminum to wearing when exposed to cutting conditions, but the durability is off the charts.
The incredible thing we'd like to share is the number of positive stops, which rests at 41. They cover a wide array of angles in the range of 90 degrees, and the extreme precision is always there.
Also, there are six expansion points, instead of the regular four, that allow for zero side play. Professional woodworkers will surely appreciate this, as well as the fact that the miter bar is fully adjustable.
Accurate cuts are not a concern, but the adjustments are not that easy, and you'll need a variety of Allen wrenches to make it happen. Aside from that, we have no complaints.
- High-quality materials
- Extreme accuracy
- 41 positive stops
- Six expansion points
- It needs many power tool accessories
We'd all like to invest as little as possible for a high-end unit, but you often have to cash in to get quality. That's the case with the JessEm 07150 Miter Gauge.
When it comes to woodworking, JessEm does it all - router tables, band saws, table miter saws - you name it! They also manufacture and sell many miter gauges, the 07150 being a case in point.
This gauge features a spring-loaded indexing pin for secure and accurate cuts, an adjustable flip stop, and aluminum components for hardened resilience. Furthermore, the fence can be extended to the maximum length of 36 inches from the standard 20 inches.
We don't like the lack of positive stops since it only has five that work in the range of 45 degrees. It's standard, but you'd expect more from such an expensive product. On the other hand, it's a sturdy miter gauge with a CNC-machined build that does it all.
Also, the miter bar is made from Sheffield steel, a famous type of steel with high density and incredible durability, which accounts for the overwhelming price.
All in all, it's a great table saw miter gauge, we'd just like to see it a bit cheaper, that's all.
- Accurate
- Sturdy
- Fence maximum length
- Sheffield steel miter bar
- Price-to-quality ratio
We've gone over some of the best miter gauges, and we have one saved up to wrap things up. If you didn't find the fit for you in the previous reviews, maybe the Big Horn 14600 Standard Track Miter Gauge will be the one for you.
This is a classic model of a table saw miter gauge that you're probably used to seeing. It's not fancy, and it doesn't have a lot of added features, but that's the beauty of it. It's easy to use and adjust; there's no hassling, just doing the job it's made for.
It works well with crosscuts and miter cuts, supports the standard 3/4-inch miter slots, and even has a tip-resistant washer for the slide bar. The angle range is up to 67.5 degrees, excluding the standard 90-degree angle.
The body, including the head and the slide, are made from a combination of CNC-machined steel and aluminum, which greatly increases this miter gauge's overall durability.
In terms of performance, it makes solid cuts, but they can't really be compared to Incra's miter gauges that have excellent micro-adjustments at small increments. It's still a solid unit that could work as a great replacement for the table saw miter gauge you have now.
- Easy to use and adjust
- Crosscuts and miter cuts
- Great build
- Quality compared to other miter gauges
What's there to learn about a miter gauge: The buying guide
These are just some of the best table saw miter gauges, but there's plenty more on Amazon and in individual stores.
If there's a reason you didn't like these units, you should be equipped to know to find the fit for you. That's why we have the buying guide right here.
We've picked some features to showcase so you'll have a better idea of how to choose your next table saw miter gauge. Stay tuned!
1. Build
A table saw miter gauge holds the workpiece at a specific angle, which can sometimes mean that you'll deal with heavy equipment. In this case, your accuracy can be a bit off if the miter gauge doesn't have the right build to support it.
As you've seen, the best table saw miter gauges are usually made with a combination of steel and aluminum. The head is often made of steel, and it's the most important part. If you're looking to save some money by buying a low-end gauge made from bad materials, you shouldn't do it.
The miter fence and the slider are usually made from aluminum, and that's the best you can do, given the quality of products that are currently made. It's the ultimate solution in terms of weight and quality.
2. Accuracy
The accuracy of angled cuts and miter cuts depends on many things. We'd like to address some of the features that are not that common, but they make cutting a whole lot easier.
For example, there are miter gauges with micro-adjustments that can help you deal with the tiniest fractions of an inch in case you're cutting a small wooden stock. It's not that big of an investment, and it makes your projects much easier to handle.
Also, more positive stops on a miter gauge will make your work more versatile and give you more options to make the most precise cuts. If the range of your cuts is somewhere between 45 and 90 degrees, you're good.
3. Versatility
Not all miter gauges can fit every table saw, so you should pay attention to the slots. The most common one measures 3/4-inch, and it'll usually work with a variety of table saw models, but if you're getting a gauge to mix it with different saws, you might want to look into that.
Also, if your new miter gauge doesn't work with your saw, check if it can be modified, as there are products that can be made to work with different slots. It'll usually be in the manual, or you can contact customer support.
FAQs
What is a table saw miter gauge?
Essentially, a table saw miter gauge is an accessory for the rip fence or the table, which is used to hold down the workpiece under an angle. Based on the angle you choose, you can make miter cuts that are often used in creating joints and manufacturing furniture.
How does a miter gauge work on a table saw?
The gauge has a metal guide that connects with the workpiece when you place it on. After you choose your angle, the system will move across the table saw blade and make the cut.
What types of cuts is a miter gauge used for on a table saw?
Aside from the obvious, a miter gauge can be used to make cross-cuts - a type of cut that goes perpendicular to the grain.
How do you use a gauge on a table saw?
The main thing for a user to do is to adjust the pivoting head by pulling on the pin, setting the angle, releasing it, and letting it lock in place. The saw will finish the rest.
What is the absolute best table saw miter gauge?
After using some of these gauges and doing our research, we'd have to go with the INCRA MITERV27 Miter Gauge.
As you've seen, Incra has some amazing units, and we included two of them in this short list.
Our favorite, on the other hand, has it all. It's accurate, durable, and has a design that fits almost all saws. Moreover, 27 positive stops only improve the efficiency in combination with the range this thing offers.
- Miter Gauge featuring 27 angle stops for precise incremental control
- No-nonsense design and compact size
- Delivers extreme miter cutting accuracy
- Four expansion points adjust for zero side play
- Universal Mounting Bracket supports any user-made fence
Final Thoughts
If you think there's more to know about the basics of miter gauges, let us know, and we'll add it. For now, beginners should be equipped with enough knowledge to purchase the best table saw miter gauge based on the information on this list.
If you're looking to shake things up and start up a new hobby, these units will surely be a huge help in the process.