Part I – What Is A Router Table Used For?

Just take a little bit time to set up and get acquainted with in cases you are newbie, but then you can master many woodworking processes such as:

  • Box joinery and Dovetail
  • Working with long, small or narrow stock
  • Utilizing a router table like a jointer
  • Edge trimming and template work
  • Grooves, slots, and dadoes
  • Stopped cuts
  • Lock-miter, finger joints and drawer lock
  • Making raised panel doors

That is also the reason why this useful machine is one of the very first choices of mostly woodworkers. From that point, why don’t you have a look at all these woodworking processes to explore how helpful and wonderful of it?

Box Joinery And Dovetail

It has a lot of methods to create box joinery and dovetail as well as the best-dedicated dovetail jigs sold in many stores and websites. With this woodworking process, a router table plays a role in cutting box joinery and dovetail with many benefits because with some dovetail jigs, they just have 1 or 2 options as maximum for the types and sizes of joint due to the function of making solid and exact joints in a hurry while a router table is able to install a cut to create various width in joint sizes in addition to the same ability to the Incra Universal Precision Positioning Jig which can add – on, it is able to make specialized decorative joints impressively.

Working With Long, Small Or Narrow Stock

It can be said that this is the easiest woodworking process for a router table because it helps to keep the stock tight to allow you to focus on the steady as well as feed rate. A router table can handle this job quickly and easily so that you need not use a handheld router anymore because long, small or narrow stock like trimming or making moldings is unable to be carried out by this tool, but a router table.

On the other hand, there is also another disadvantage if you choose to use a handheld router which is cutting small pieces of stock because it cannot balance itself as well as the router table. You need to hold the router on hands to upright exactly on stock which leads to the decrease in the accuracy and how good of the job. To ensure the capacity and good job, the very essential element is to hold the stock right at its place during your work and a router table is absolutely affordable to this. It keeps your hand free to hold the stock firmly while the table holds the surface of the work pieces sturdy and flat.

Utilizing A Router Table Like A Jointer

There is a very general question on many forums about woodworking which is that if a router table can be utilized as an edge jointer. The answer is absolute yes. In reality, this helps to save space as well as money a lot because the router table can alter an edge jointer to carry out its jobs with just a few minutes to install.

Edge Trimming And Template Work

One more benefit of a router table is to trim edges and does the template work to make the stock turn into smooth, square and flat surface. If you attach a template or a straightedge to the stock, it will be the fastest and most useful method to make an edge clean or just to form an arched frame top in a perfect way and the same with a panel door in particular saying and for the entire curved part in general.

With this woodworking process, utilizing a router table can speed up the time because it is able to remove the demand of holding not only the pattern but also the work piece while the cut is made. For those who used to trim an edge or an arched door top, you can understand how accurate shape of it when utilizing a flush trim router when you prepare to profile with an increased panel bit.

Choosing to use a router table to carry out this process is a smart choice because it can support the work piece in the best way while a handheld router cannot be as good as it.

Leave a Comment: