What’s The Proper Oil To Use For Your Nail Gun?

Having a hard time securing that stubborn nail?

Get this problem solved with a nail gun and make sure it is properly lubricated. However, it can be rather disheartening trying to look for an oil for your nail gun.

The easier part of the solution is to look for it. But, it can be confusing to know what kind of oil would work for your nail gun.

Though there are numerous nail guns out there in the market, it wouldn’t be as helpful without finding what kind of oil for nail guns would be the best.

As one forum suggests, it is always helpful to be cautious of what oil you would use.

After all, you do not only want to protect your work but yourself as well.

There had been several cases of mishaps because of the improper oil that was used on their nail guns.

More...

Taking Care of Your Nail Gun

how to use a nail gun

You could not just put any kind of oil. There is an appropriate oil for the type of tool you are using.

Some goes through the mistake of lubricating their nail guns with non-detergent oil. The result is that the O-ring in the nail gun had swollen and become damaged.

The usual reason of air nailer failure is brought about by component wear that is caused by minimal lubrication. It is common knowledge that generic lubricants can do the trick for you.

It is accessible and almost always readily available on your local auto stores, online shops, department stores and even malls. Rather than helping, this could make matters worse for the tool.

Why does this happen?

Many of the generic lubricants sold have components that consume rubber over time. This is the cause behind the component wear of the nail gun. It is important to note that most nail guns have rubber O-rings.

Most of the manufacturers of such tools suggest that the moving parts of the tool should receive regular lubrication.

There may be instances that you would come across a self-oiling valve design. If that’s the case, check on the manual attached so you would be able to verify on which instances you could lubricate the tool to keep it going.

Regardless of whatever design (self-oiling valve or the regular one), the technique of prolonging the lifespan of your nail gun has to do with proper lubrication and know what kind of oil for nail gun could be appropriately used.

You don’t have to go through this inconvenience. It is not necessary to shell out another $40 or so from your pocket just because of the incorrect oil that had been used!

Lubrication is the Key

One of the most recommended ways in taking care of your nail gun is to lubricate it.

It is both cost-effective and easy to do.

The average oil for nail gun are sold $7 and above, depending on the brand and how much it contains for each bottle purchased.

Moreover, a standard one quart bottle could last for more than a year. This can be usually purchased on local auto stores or online.

But, what kind of oil for nail gun has to be used exactly?

The answer to the above-mentioned question is detergent oil. You would only be needing 2-3 drops of detergent oil to lubricate the nail gun.

You could put in the detergent oil at the bottom of the nail gun.

However, it is important to pay attention on the gun’s moving parts. This should be done daily preferably before and after using.

Meanwhile, in the event that the nail gun would be used throughout the day, it is best to do it periodically at different times during the session to make certain that the gun works out smoothly.

Remember to fire the nail gun two or three times so that the oil can work through the valves.

Always remember that the general rule of thumb is to lubricate any moving parts of the nail gun.

Purchasing of Nail Gun Lubricants

how to oil nail gun

You may be surprised to know that there are a lot of lubricants out there. Thus, it can be confusing.

How do you know what could be the best lubricant to use?

In this article, we discussed about using detergent lubricant oil to take care of your nail gun. Recommended quality brands are Paslode, Bostitch and Porter Cable.

You can check on their websites to check on the pricing, availability and description of their nail gun lubricants.

Please refer on your tool manual to verify what kind of detergent oil lubricant brand will work best for the nail gun.

You could also read through the product reviews and know what the consumers think about this product. Online community forums are helpful as well in helping you decide what to purchase based on their experience on the product.

It is important to note as well that upon purchasing you check on the shipping fee. You don’t want to experience any unnecessary shock upon payment on your credit card.

On that note, you may check on relevant and trusted online retail stores like Amazon and Ebay that may provide discounts and waiving off shipping fee upon purchase.

If you know a specialist who can provide additional advice, that would also be helpful.

Conclusion

Always consider lubricating as your option to take care of your nail gun. It is helpful to remember these tips for proper lubrication of your tool:

  • Purchase a detergent lubricating oil.
  • Put 2-3 drops of this type of oil on the bottom of the nail gun and most specifically on the moving parts of the tool.
  • Do this regularly — everyday, before and after use or periodically as needed.
  • Check the manual, refer to the company’s website or talk to an expert on a repair center as necessary.

Finally, it is best to regard safety as an utmost consideration.

If you have any questions for this article, feel free to comment on the section below.

Leave a Comment